Inspecting the Frame

Just a quick look at the condition of the frame. Took some measurements. Found a repair at the bend under the door that leads to the tounge. Thinking to replace the frame instead of just adding reenforcement.

Hitch receiver was a bolted add-on.

Measured the frame:

bumper

bumper height

long side frame

long side frame

Total frame width

Safety chain welded to the frame

This is what held the spare tire

under the hitch, side frames are 3/16" thick

Doesn't really look like a good repair weld

bend in drive side

deep pocket in the bend. the reason its a failure point on these campers

Looking at the axle mounting:

Overall, the frame looks mostly sound and thought to add some additonal metal to strengthen the frame before replacing the floor. After measuring the frame, I'm now looking more at replacing it. 3/16" metal thickness doesn't sound like much. I think 1/8" would be better. Looking to change the 1.5" x 3" frame sides to 2"x4" but best to talk with a trailer shop to see what they think as well.

Of course, with all this work, axle would need to be replaced. I have some thoughts on that I'm listing in the Renovation Ideas tab above.